Grade B Full -Tooth Nickle Alloy Screw
The special imported alloy powder was sprayed uniformly on the screw surface by hot melt injection:
Processing range: Ф 22 mm - 300 mm Ф
Raw material: sl-01 ~ sl-06 (generation)
Material quality time: 48 hours, hardness: HRC30.
Alloy hardness: HRC62 is about C.
Alloy composition: Fe+Ni+Cu+Mo+V+Cr.
Thickness of alloy layer: 0.8-2.5.
Screw straightness: 0.015mm/m.
Surface finish: Ra0.6um.
It is suitable for producing plastic: it is corrosive and has a large amount of glass fiber content of 25% to 45%,LCP, PA, PC, PBT, PP, PET, PA66, PA666, PEK and no halogen.
Processing range: Ф 22 mm - 300 mm Ф
Raw material: sl-01 ~ sl-06 (generation)
Material quality time: 48 hours, hardness: HRC30.
Alloy hardness: HRC62 is about C.
Alloy composition: Fe+Ni+Cu+Mo+V+Cr.
Thickness of alloy layer: 0.8-2.5.
Screw straightness: 0.015mm/m.
Surface finish: Ra0.6um.
It is suitable for producing plastic: it is corrosive and has a large amount of glass fiber content of 25% to 45%,LCP, PA, PC, PBT, PP, PET, PA66, PA666, PEK and no halogen.